13
Dec

Trace Monotype & Watercolor: All in Green

A trace monotype print with watercolor washes of a red headed girl with green eyes and a green collar

All in Green 5×4.5 inch Trace Monotype with Watercolor (sold)

What is a Trace Monotype?

Trace monotype is a form of printmaking based on drawing into a sheet of paper laid on an inked plate, rather than carving (as in woodcuts or engraving). It’s a very accessible printmaking method because even if you don’t draw well, you can simply trace your lines, as the title implies. As a bonus, making a trace monotype doesn’t require a press, and there are a variety of ways to add other media to enhance a trace monotype with color.

Trace Monotype Techniques

Here are photos of one approach to this wonderful printmaking process:

black ink on a metal plate sitting on non-skid support with a technical pencil nearby

A small zinc plate – totally smooth – with an even layer of intaglio printmaking ink rolled over the surface with a brayer, ready to make a trace monotype

Step by Step Method for Making a Trace Monotype

After rolling printmaking ink evenly with a brayer on a smooth plate (you can use metal, glass, drafting film or acrylic as your plate), I lay a thin sheet of printmaking paper (you can use 90lbย Arches cover, or BFK Rives Lightweight) on top of the wet ink, and carefully draw the beginnings of my image on the paper with a technical pencil. The pencil-to-paper texture is familiar to me, and the pressure of drawing collects a line of ink on the back of the paper as my pencil bears down on the cover sheet.

Tools for the Job

For this drawing part of the process, it’s helpful to use a small piece of non-skid under your plate to keep it from slipping around, and a drawing bridge to keep your hand from pushing your paper into the pigment and leaving bruises of ink on your art. If your ink seems too heavy, and your light-weight paper sinks into the wet pigment in a solid, plate-shaped mass, it’s helpful to first lay a scrap sheet of newsprint on the ink, pet it very lightly and evenly with your hand, and then peel it away to remove a bit of the uppermost layer of ink off the entire plate, like you’re blotting excess lipstick with a tissue. ๐Ÿ’„ย Then, lay a fresh sheet of printmaking paper on top of your newly thinned ink, and draw (or trace) your design. If you’re tracing, lay your reference photo on top of your printmaking paper, hold the plate-paper-photo sandwich steady with one hand, and trace the lines directly onto the photo.

 

a hand drawing on a thin sheet of paper laid on top of an inked plate with a technical pencil

Using a technical pencil to draw a graphic design on thin paper, which pushes the verso of the paper into the wet ink on the plate

a hand pulling a sheet of paper off a rectangular plate coated with black ink

Pulling the print: gently peel the paper off the inked plate to reveal the trace monotype on the back of your paper. The contact with the wet ink will leave smokey passages on the paper, depending on the tooth of your paper, the viscosity of the ink, and the tool you use to draw with.

a linear drawing of a woman's face, made via trace monotype with black ink in smoky passages on the paper

The trace monotype shown above, before the watercolor was added. Note the lovely sfumato affect where the paper made contact with the ink.

Triple Your Results

Two extra benefits of using this printmaking process can result in even more art from this single creative session. After you pull the trace monotype off your inked plate, you’ll see the map of your drawing in the ink (see below).ย  Those inky grooves are a perfect starting point to create a dark field monotype from that plate. See a video tutorial for this process here.

Faint lines of a face left in the ink on the plate after the trace monotype was pulled from it

The printmaking of All in Green above left an inked plate with a lovely beginning for a dark field monotype in the ink.

 

But Wait, There’s More!

In addition to your trace monotype pulled from the plate, and your dark field monotype created with the remaining ink on the plate, you can also print from your print! I know – crazy-face!ย  ๐Ÿคฏ But stay with me; the trace monotype you just pulled from the plate has a wet-ink drawing on one side of the paper. You can lay the wet-ink side down on a fresh sheet of printmaking paper, and either hand rub (holding both sheets together with super-hero efficiency), or roll them through a press to make *another* trace monotype, which will print in reverse from the first one! Coolness, right? Whoop-whoop! See below.

Printing a trace monotype from a still-wet trace monotype to make even more art, but in reverse

Making another trace monotype from the first while the ink is still wet by pressing the ink-side against a fresh sheet of printmaking paper

Look at All This Art!

So now, you and I have a trace monotype from your very first pull off the inky plate! And we have a dark field monotype from the remaining ink on that same plate. And there’s also another trace monotype pulled from the still-wet surface of the first trace monotype. Three for one! Pompoms and confetti and crowds cheering! We link arms and do an Irish jig around the room!

a linear trace monotype of a young girl's face with the first washes of red hair in watercolor

Laying transparent washes on the first trace monotype in this lovely printmaking process.

Another trace monotype being pulled from a freshly born trace monotype while the ink was still wet on the first print

A trace monotype pulled from another trace monotype; twins in reverse

So much art to play with! After the ink is dry, you can add watercolor, colored pencil, pastel, craypas, caran d’ache crayons.ย  The possibilities are an art party!

On Your Mark…

So, now that you know how to do this printmaking process, let’s you and me get crackin’ and make something!ย  Here are some tips:

  1. For starters, keep your design relatively simple, with plenty of space between your line-work. Choose an image that doesn’t have a lot of detail, until you get the hang of your supplies.
  2. The results will vary greatly depending on your choice of ink, the thickness you roll it out on the plate, the weight and tooth of the paper, your drawing tool, and the humidity of your environment.
  3. To avoid frustration, consider your first few prints EXPERIMENTS, vs aiming right out the gate for a MASTERPIECE. If you want to learn more about monotypes in general, here is a playlist on my monotype tutorial and demonstration channel on YouTube.

Feel free to leave questions in the comments on the channel, or here on the blog. And you can subscribe to the channel here or the blog here, so you don’t miss upcoming tutorials.

Happy printmaking, and I’ll see you in the next post!

Belinda

 

Another trace monotype, pulled directly from a plexiglass table in my studio with leftover ink from another project.

P.S. Where did that Title come from?

All in green went my love riding
on a great horse of gold
into the silver dawn.

e e cummings

 

Art Quote

I think of art as a glue, a cultural and social glue. It’s one of the means that has served to show us the things we believe in and the things we celebrate; it has served to reinforce our relationship to each other.

– Eric Fischl

how to title your art

Click the pile of frames to visit this effective online course, featuring three methods to title your art. And get a discount, just for you. ๐Ÿ™‚

Summary
Review Date
Reviewed Item
How to make a trace monotype portrait with black printmaking ink and watercolor, without a press.
Author Rating
51star1star1star1star1star

7 Responses to Trace Monotype & Watercolor: All in Green

  1. Christina Martin November 2, 2012 at 4:44 am #

    I love the black spots! They lend an antique feel to the piece. This is what caught my eye!

    Nice work!

  2. Janet December 14, 2006 at 9:37 am #

    Yes, how Would it look without the black spots? This is one of my faves. Love it!!

  3. Johnnie Scoutten December 14, 2006 at 4:15 am #

    This is absolutely fascinating. And the color is magical.

  4. Sugar Mouse In The Rain December 14, 2006 at 2:25 am #

    The final product looks very good. I wonder how it would look like if you tried to remove or avoid the black blotchs/spots.

  5. Anonymous December 13, 2006 at 4:51 pm #

    Neat effect! Is this called a “trace monoprint”?

Trackbacks/Pingbacks

  1. Monotype Printmaking - Learning to Love Books, and a monotype video from MOMA - Belinda Del Pesco - April 16, 2018

    […] define the tutorial nature of this blog (circa 2005). I took plates and sample prints to Descanso, described the process in person, and then shot process photos back in the studio to share on the blog as further […]

  2. Trace Monotype & Watercolor | Belinda DelPesco - January 30, 2015

    […] Wanna Split a Sandwich? 5 x 7 Trace Monotype & WatercolorAvailable for sale here. […]

Write something.... we'll wax poetic about art & making things!

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Site by Spunmonkey